FDE Springfield Echelon Performance Compensator

FDE Springfield Echelon Performance Compensator

Patriot CNC
$74.99
(No reviews yet)
Current Stock:
Adding to cart… The item has been added
Description

Springfield Echelon Performance Compensator

  • Designed around the OEM threaded barrel that is available on Springfields website.
  • Runs with OEM recoil spring and 115gr ammunition.
  • Adds 1.175" from face of slide, and is the shortest OEM barrel compatible Echelon Compensator on the market.
  • Perfectly designed to run with both the 4.0, and the 4.5 Variants.
  • Single top port with side ports.
  • Designed to flow nicely with the OEM slide design, while also standing out on its own.
  • Easy install.
  • Like any of our designs, Performance drives everything. 
  • Cerakote  color - Springfield FDE
  • Comes with all necessary hardware.

INSTALLATION INSTRUCTIONS

  1. REMOVE MAGAZINE AND ENSURE PISTOL IS CLEAR AND SAFE.
  2. REMOVE SLIDE FROM FRAME.
  3. REMOVE RECOIL SPRING AND BARREL.
  4. MAKE SURE BARREL THREADS ARE CLEAN AND FREE OF DEBRIS. 
  5. INSTALL THREADED BARREL INTO SLIDE.
  6. PUSH BARREL OUT OF BATTERY TO WHERE IT IS PROTRUDING FROM FRONT OF SLIDE.
  7. APPLY BLUE LOCTITE 243 TO BARREL THREADS.
  8. SCREW ON COMPENSATOR ALL OF THE WAY AND STRAIGHTEN TO MATCH SLIDE.
  9. PUSH BARREL INTO BATTERY.
  10. REMOVE BARREL FROM BATTERY AND UNSCREW COMP 1 ROTATION AT A TIME UNTIL BARREL GOES INTO BATTERY.
  11. STRAIGHTEN COMP TO MATCH SLIDE.
  12. APPLY BLUE LOCTITE 243 TO SET SCREWS AND INSTALL SCREWS IN COMP WITH A 1/16 ALLEN WRENCH.
  13. TIGHTEN SET SCREWS ONTO BARREL OD.
  14. YOU MAY HAVE TO GO BACK AND FORTH BETWEEN SET SCREWS FOR STRAIGHTNESS.  
  15. LET LOCTITE CURE FOR 24 HOURS.  
  16. CLEAN COMP EVERY 750-1000 ROUNDS.