**READ DESCRIPTION**
**READ LEAD TIME BELOW
**WE WILL ONLY MILL FOR SLIDES ON THE APPROVED APPLICATION LIST**
Looking to add our Slim Comp Porting option to your favorite pistol, then look no further! As with any of our porting, they have all been tested on factory guns with factory springs and factory ammunition. We cannot guarantee that every gun will run the same, but we have done our due dilligence to take the guess work out of porting to ensure you are getting a reliable and performance minded setup. If you want to enhance the performance of our porting you can tune your recoil spring weight, but it is generally not required.
This system is essentially an integral comp, built into the front of your slide/barrel. The key to this system is the unique bore we machine on the barrel. This feature is what makes our slim comp porting unique from anything else on the market. We are not only machining a port in the front of your slide. We take your slide, and machine the required window in place of your front sight. If desired, we will place a new front sight behind the window. The barrel is flush cut and crowned to your slide. The special bore is then machined into the front of your barrel. Outside of the performance aspect of the bore, it removes the rifling from under the port area so there will be no issues with accuracy or spalling. We do not require black nitride on the barrel, but we definitely reccomend it if your barrel is not stainless.
**APPROVED application list**
-All Glocks excluding Glock 42
-S&W M&P and Shield Models
-Sig Sauer P320, P365 (all models)
-Walther PDP Models
**If you do not see your application, you can still email us. We will consider every model on a case by case basis.
**Single color cerakote included in pricing!!
**AS OF 06/18/2024 WE HAVE UPDATED OUR LEAD TIMES ON PORTING AND OPTIC CUTS. OUR GOAL IS TO PROVIDE THE HIGHEST QUALITY OF APPLICATION POSSIBLE. WE REFUSE TO CUT CORNERS OR DELIVER YOU A SUBPAR PRODUCT, TO REDUCE TIME. OUR STANDARDS FOR APPLICATION ARE MUCH TIGHTER THAN "IT WORKS". WE ARE AN INDUSTRY LEADER IN QUALITY OF APPLICATION. IN AN EFFORT TO BE MORE CONSISTENT WITH OUR LEAD TIMES AND PROVIDE A BETTER CUSTOMER EXPERIENCE, WE ARE ONLY ACCEPTING SERVICES THAT ARE LISTED ON THE WEBSITE. AS OF RIGHT NOW, WE ARE ONLY OFFERING PORTING AND OPTIC CUTS. IF IT IS NOT LISTED, WE DO NOT OFFER IT.
LEAD TIMES
OPTIC CUTS AND PORTING WITHOUT NITIRIDE (CERAKOTE ONLY): 4 WEEKS
OPTIC CUTS AND PORTING INCLUDING NITIRIDE: 8 WEEKS
-WE USE ONE OF THE BEST BLACK NITRIDE PROVIDERS IN THE INDUSTRY. WE WILL NOT SACRIFICE ON THE QUALITY OF NITRIDE THAT WE OFFER TO REDUCE TIME.-
