Springfield Echelon Holosun 509T Plate

Springfield Echelon Holosun 509T Plate

Patriot CNC
$29.99
(No reviews yet)
Current Stock:
Description

**READ DESCRIPTION AND INSTALL INSTRUCTIONS**

This is an adapter plate to mount the Holosun 509T to your Springfield Echelon.  These plates are made to tight tolerances for hard use.  These come in hard coat anodized black.

We recomend SKU: XDM5027T-RET off Springfields online store for BACK UP IRONS.

INSTALL INSTRUCTIONS:

1: Make sure pistol is unloaded and remove magazine.

2: Ensure chamber is clear.

3: Ensure chamber is clear.

4: Remove slide from pistol.

5: Remove barrel and recoil spring.

6: Remove OEM optic cut cover.

7: ***Retain OEM screws for cover.***

8: Place Patriot CNC plate into slide facing the correct direction (curved front of optic facing front of slide).

9: Seat the plate carefully.

10: These plates are made tight on purpose. 

11: Ensure plate is seated flat, press down with force as needed to seat the plate. 

12: Reinstall the screws from the OEM cut cover. (Use thread locker such as blue loctite or vibratite.  **NO RED**)

13: Torque screws 18-25 IN/LB